  |
| |
These are frequently asked questions received from our customers. If you have a question not covered here, please do not hesitate to contact our technical staff at (856) 881-2345 or email us at info@inversand.com
|
| |
|
| Q. |
Is it necessary to use KMn04 to regenerate GreensandPlus? |
| A. |
No, any strong oxidant i.e (chlorine ozone etc.) can be used. |
| |
|
| Q. |
What is the recommended composition of the potassium permanganate or chlorine solution used in the initial regeneration of manganese greensand and GreensandPlus? |
| A. |
For most applications of manganese greensand, a solution of 4 oz. (by weight) of potassium permanganate, mixed well, for each gallon of water is the proper proportion. However, for water at a temperature of less than 55 °F, more water may be necessary. |
| |
|
| Q. |
How long should the media soak in the potassium permanganate or chlorine solution during the initial conditioning? |
| A. |
The minimum recommended contact time for the initial regeneration is 2 – 4 hours at the recommended dosage and solution concentration. Where possible, it is recommended that soaking overnight ensures sufficient regeneration. |
| |
|
| Q. |
Does chlorine harm GreensandPlus or Manganese Greensand? |
| A. |
Chlorine is not detrimental to either one. However, when either one is exposed to chlorine solutions in excess of approximately 1%, permanganate can be formed, resulting in purple water. |
| |
|
| Please Note: Potassium permanganate is not usually required for most GreensandPlus applications. Rather, chlorine or any oxidant of your choice may be substituted for potassium permanganate in your application. |
| |
|
| Q. |
How long should the media soak in the selected oxidant during the initial conditioning of manganese greensand or GreensandPlus? |
| A. |
The minimum recommended contact time for both media in the initial regeneration process is 2-4 hours at the recommended solution concentration. Where possible, it is recommended that the media be soaked overnight, to ensure sufficient regeneration. |
| |
|
| Q. |
How should manganese greensand and GreensandPlus be disinfected? |
| A. |
Both media can be disinfected in accordance with AWWA standards (see www.awwa.org). |
| |
|
| Q. |
What is the life expectancy of manganese greensand and GreensandPlus? |
| A. |
For manganese greensand, a useful life of 5-8 years or more in a properly operated filter system is possible, depending on service conditions.
For GreensandPlus, with a properly operated filter system, a life expectancy of 10-15 years or longer is possible with proper service conditions.
|
| |
|
| Q. |
What is the recommended backwash rate? |
| A. |
The recommended backwash rate is 12 gpm/ft2 with water at 55°F. Warmer waters require higher flow rates. |
| |
|
| Q. |
How important is the backwash? |
| A. |
A properly conducted backwash is very important to the life of the media. The backwash is the primary, if not the only mechanism by which dirt is removed from the filter. Starting with a clean bed works to preserve the performance of the media. |
| |
|
| Q. |
How is a filter properly sampled? |
| A. |
Proper sampling of filter media in a tank requires core sampling, where a representative sample of the entire bed is achieved. This can be achieved with a piece of thin walled tubing. The minimum recommended sample volume is one (1) quart. Please contact us if you need instructions on sampling.
|
| -
Home -
Product Information -
Industries -
What's New -
Contact/Info -
Links -
Site Map - |
GREENSANDPLUS
